OakRidgeTNTreeService.com

Oak Ridge, Tennessee · Anderson and Roane counties

Guides
(865) 276-8556

Anderson and Roane counties, Tennessee

Tree Service in Oak Ridge, TN

Need tree service in Oak Ridge? Call (865) 276-8556 or fill in the short form, and one independent local contractor who works Oak Ridge, Clinton, Norris, Rocky Top and the rest of Anderson County comes out, looks the tree over, prices the job and does the work: removal, trimming, stump grinding and cleanup after a storm.

Oak Ridge sits among long wooded ridges, and yards here can tilt toward a hollow, back up to city greenbelt or sit under tall poplars and oaks. On Chestnut Ridge, a soil survey done for Oak Ridge National Laboratory found ground formed from Knox Group dolostone, heavy with chert, with a red clay subsoil (ORNL, Soils of Walker Branch Watershed, 1994). Slope, rock and clay all change how a tree comes down and what a stump grinder runs into.

Tell the contractor about the tree

Name, number and one choice. The contractor calls back for the details.

Want to add the slope, the greenbelt or the power line? Use the full request form.

From your call to a cleared yard

  1. You call or send the form with your street or neighborhood, the tree and what's wrong with it. "Big poplar behind the house, leaning toward the deck" is plenty to start.

  2. One independent contractor who works Oak Ridge and the Anderson County towns calls you back, asks what the form left out and sets a time to see the tree.

  3. Once the contractor has seen it, you get a price. Say yes and the two of you set the date. Say no and that's the end of it.

What the contractor can take on

Each of these has its own page with the Oak Ridge rules, local problems and published prices that go with it.

A climber tied in high in a tall tulip poplar on a sloped back yard cuts a side limb with a small chainsaw while a ground worker drags brush away
A climber roped into a tall tulip poplar on a sloped yard, cutting a side limb while the ground worker clears the brush.
  • Tree removal

    On a lot that drops toward a hollow, a 100-foot poplar usually can't be felled in one piece. It comes down in sections, lowered on ropes or cut from a bucket truck, and the wood has to be carried uphill or down to the street. The removal page covers rigging, the greenbelt line behind many yards and what happens to the wood.

  • Tree trimming

    Deadwood over a roof, limbs hanging low over the street, a white oak crowding the gutters. Oak Ridge's code bans topping on city-owned trees and sets out when the city can prune trees on private land that block a street or line. The trimming page explains both, plus what good pruning cuts look like.

  • Stump grinding

    Tennessee law asks for at least three working days' notice to Tennessee 811 before digging, and a grinder digs. Ridge soils here hold chert that is hard on grinder teeth, over red clay. The stump page covers the 811 call, the rock, slopes and per-inch prices.

  • Fallen and storm-damaged trees

    A tree through the roof, across the drive or on the service wire. The storm page lists what happened around Oak Ridge in 2014, 2015, 2019 and 2021, what to do before anyone starts cutting, and how storm work is usually billed.

  • Trees on the greenbelt

    Some back yards in Oak Ridge end at city greenbelt. City code makes it unlawful to cut, trim or remove a tree there without the city manager's written permission, and the city has gone to court over it. The greenbelt page shows how to tell where your lot ends.

  • Trees and power lines

    Oak Ridge Electric trims to at least nine feet from its top wires but leaves the line into your house to you. The power line page covers what the city and Clinton Utilities Board do, the state rule on working within ten feet of a high-voltage line, and how a service drop gets dropped for the work.

  • Dying ash, pines and hemlocks

    Emerald ash borer was confirmed in Anderson and Roane counties in 2012, and the state says it can kill an ash within three years. Southern pine beetle and hemlock woolly adelgid are on the list too. The pest page covers the signs of each.

  • Know your trees and your ground

    Yellow poplar, white and chestnut oak, hickory, Virginia pine, black walnut, ash: each fails, roots and rots differently on cherty ridges and shale valleys. The yard-tree page helps you name the tree before the contractor arrives.

When trees have come down in Oak Ridge

June 10, 2014. A storm crossed Oak Ridge around 5:30 p.m. Roughly 4,000 customers lost power, and about 70 damaged homes needed an electrician's repairs before power could go back on. Electric Director Jack Suggs said he didn't recall ever having 70 homes damaged in one storm. On West Wadsworth Circle a falling tree punched through a roof and displaced a family of four; on Plymouth Circle a tree came into a bedroom (Oak Ridge Today, June 11, 2014). Anderson County was one of the counties in the federal disaster declaration for the June 5 to 10, 2014 storms (FEMA-4189-DR).

April 14, 2019. A woman was seriously injured by a falling tree at a home on Nesper Road during an afternoon storm that also brought down trees and power lines across the city, according to the City of Oak Ridge (Oak Ridge Today, Apr. 15, 2019).

May 27, 2021. A 150-foot tree standing well outside the utility right-of-way fell onto a transmission line on Wiltshire Drive, and more than 7,200 customers lost power. The city's electric director told City Council that falling trees and limbs had caused about half of Oak Ridge's outages that year (Oak Ridge Today, July 22, 2021).

The storm page has the longer list and what to do when it's your house.

What a tree job here tends to cost

For Oak Ridge, Angi lists an average of $900 for tree or shrub removal and trimming, with most jobs between $436 and $1,223 and a low-to-high spread of $160 to $2,500 (Angi, Oak Ridge, TN, undated, checked Nov 22, 2026). National figures by job:

JobPublished rangeSource
Removing one tree$300–$2,000 on averageHomeGuide, checked Nov 22, 2026
Removing a tree over 80 ft$1,200–$2,700HomeGuide, checked Nov 22, 2026
Trimming one tree$430–$640LawnStarter, updated Sept 24, 2026, checked Nov 22, 2026
Grinding one stump$120–$400HomeGuide, checked Nov 22, 2026
A worker feeds oak limbs into a tow-behind chipper parked at the curb of a sloping street, the chute aimed into the box of a chip truck, a split-level house behind
Oak limbs going into a chipper at the curb of a sloping street, the chute blowing chips into the truck box in front of a split-level house.

No price list specific to Oak Ridge turned up in public sources (checked Nov 22, 2026). These are what move a single job up or down:

  • Which way it would fall. A tree with open lawn downhill is quick. The same tree leaning over a carport with the yard falling away behind it gets taken apart piece by piece.
  • The slope. Bucket trucks and grinders need level, firm footing. Where they can't reach, the work goes to climbing and hand-carrying.
  • The species. HomeGuide's national figures run $1,100 to $3,000 for a poplar and $250 to $2,500 for an oak (HomeGuide, checked Nov 22, 2026).
  • The wire. If limbs run through the service drop, the city or Clinton Utilities Board may need to take the line down first.
  • The wood. Hauled off, split for firewood or left as chips.

The price page has every table with its source and date.

Does Oak Ridge make you get a permit?

Not for a tree on your own lot. The city's tree chapter, Title 13, Chapter 4 of the City Code, controls trees on city greenbelts, rights-of-way, parks and other city property, where cutting or trimming takes the city manager's written permission (§13-401, checked Nov 22, 2026). The rules page sets out all six sections, including the one that lets the city order a dead or diseased tree on private land removed.

Towns the contractor covers

  • Oak Ridge
    Both the Anderson County and Roane County parts of the city, under Oak Ridge's own City Code and Oak Ridge Electric.
  • Clinton
    Its own tree code and its own power company, Clinton Utilities Board. See the Clinton page.
  • Norris
    On the contractor's list of towns.
  • Rocky Top
    On the list too.
  • Andersonville
    On the list as well.
  • The rest of Anderson County
    Claxton and Oliver Springs sit nearby; ask when you call whether the contractor's route reaches your road.

Questions Oak Ridge homeowners ask first

Can I cut down a tree in my own Oak Ridge yard without asking the city?

For a tree on your own lot, the city's tree chapter has no permit requirement; its permission rule covers city greenbelts, rights-of-way, parks and other city property (Oak Ridge City Code §13-401, checked Nov 22, 2026). The catch is knowing where your lot ends. See the greenbelt page.

Who trims the limbs around the wire to my house?

You do. Oak Ridge Electric says it doesn't maintain clearance of limbs on the service drop and that "The property owner is responsible for these trees." If you ask, the department will take the service drop down so a tree beside it can be trimmed or removed, during business hours and at no charge (Oak Ridge Electric, checked Nov 22, 2026). Details are on the power line page.

My ash tree is losing its top. Is it worth saving?

Emerald ash borer was confirmed in Anderson and Roane counties in May 2012, and the Tennessee Department of Agriculture said the beetles "can kill an ash tree within three years of the initial infestation" (TDA, May 18, 2012). The adults leave D-shaped exit holes in the bark as they emerge (TDA, 2010). The pest page covers when a dying ash becomes a hazard.

Does grinding a stump need an 811 call?

Tennessee law requires notice to the one-call center at least three working days, and not more than ten, before excavating (Tenn. Code Ann. §65-31-106), and the state's underground utility damage prevention office says "There is no charge for requesting utility line markings" (Tennessee Public Utility Commission, damage prevention FAQ), both checked Nov 22, 2026. See the stump page.

Who does the tree work?

One independent local tree contractor who works Oak Ridge, Clinton and the Anderson County towns. That contractor takes your call or form, looks at the tree, sets the price and does the job if you agree.

What should I have ready when the contractor calls?

The kind of tree if you know it, a rough height, what it would hit, whether it's dead, leaning or cracked, whether a wire runs through it, whether your lot backs up to greenbelt, and what you want done with the wood. The hiring guide lists the questions to ask back.

A poplar over the roof, a cracked oak, a stump in the way?

Call or send the form. One independent contractor who works Oak Ridge, Clinton, Norris and Rocky Top comes to see the tree, names a price and does the job if you say yes.

Call (865) 276-8556 Form